Back to Welding

Posted: 14th December 2011 by asteriskr in Rallye 16v, Welding
Tags: , , , , , ,

Well managed an hour tonight, looking forward to getting some quality time on this over the next few weeks. Seeing as I am going down the heated windscreen route and have stripped out the heater matrix and blower, there was another hole to fill in the bulkhead. Stitched the steering rack support whilst I was at it.

Welding

The top of the scuttle is a mess so will need a bit of work. First thing was to chop out this bit

Welding

And welded in a new section. Also welded up the seam where the lower part of the scuttle had been cut. It’ll look better once I’ve cleaned it up with a flap disc in the grinder.

Welding