Posts Tagged ‘Omex’

Air Temperature Sensor

Posted: 19th January 2011 by asteriskr in Rallye 16v
Tags: , , , ,

I’ve been after one of these Air Temperature sensors for my loom for a while and finally Managed to track one down from Burton Power. It’ll help the ECU trim the engine for variations in the weather.

Air Sensor

Comparing the Looms

Posted: 7th October 2010 by asteriskr in Rallye 16v
Tags: , , , , , ,

Gave the gearbox the second stage of cleaning tonight and then cracked on with the wiring looms. Here’s the comparison:

Omex Loom: Standard Engine Loom:
  • ECU
  • Injectors
  • Throttle Position Sensor
  • Inlet Air Temperature
  • Coilpack
  • Coolant Temp (ECU)
  • Lambda
  • Crank Position Sensor

– – –

  • Fuel Relay
  • Rad Fan Relay
  • Dash – Shiftlight
  • Dash – Tacho
  • ECU
  • Injectors
  • Throttle Position Sensor
  • Inlet Air Temperature Sensor
  • Coilpack
  • Coolant Temp (ECU)
  • Lambda
  • Crank Position Sensor

– – –

  • Throttle Body Heater Connector
  • Idle Speed Stepper Motor aka Idle Control Valve (ICV)
  • Engine Fusbox
  • Engine Fusebox
  • Perge Valve Solenoid
  • Oil Level
  • Oil Pressure Switch
  • Alternator Live
  • Alternator Earth
  • Injector Relay
  • Manifold Air Pressure (MAP) Sensor
  • Knock Sensor
  • Starter Live
  • Starter Earth
  • Gearbox
  • Oil Pressure
  • Coolant Temp (Dash)
  • Gearbox Speed Sensor
  • Gearbox Earth

Some of the items on the standard loom are redundant with the Omex setup and Throttle Bodies so will be omitted. Other items will need the wiring preserving and so these will be raided from the spare loom. There’s also some necessities on the front lighting loom that I’ll consider splitting out and incorporating into the engine loom.