Finished the brakes off tonight. Used a Gunson easy bleed system to push the fluid through the lines and it worked a treat. Used Dinitrol cavity wax inside the gusset repair sections, plugged them back up and painted the outsides with Gravitex. Will get some pictures of that posted up - shown here with the... Continue Reading →
Yesterday with the chassis rail and gusset repair section for the near side ready, welded the repair section on and then prepped it for paint. Prepped Fitted Also seam sealed the O/S section that had previously been POR'd. Not pretty, but no one is going to see it once it's covered in Gravitex and painted.... Continue Reading →
Right progress from the last few days. N/S chassis rail section in primer. Fabricated up a repair section for the chassis rail. Utter, utter bastard complex shape to get right, but made it spot on in the end. Removed the passenger seat, lifted the carpet and moved the fuel line out of the way and... Continue Reading →
Finally went through the paperwork for the car today and discovered that in 2007 it had an MOT advisory on the chassis rail gusset on the near side. Kind of wish one of the previous owners had tackled it before it came as bad as it is now. Crushed metal, underseal and regular exposure to... Continue Reading →
Finished the offside repair tonight by welding in the gusset repair section. Tricky section to fabricate, but luckily I had carefully removed the original damaged gusset so could use that as a guide. Then ground down the welds. For reference swaging the holes is important for getting the plugs to fit in correctly... Over the... Continue Reading →
No updates for a few days. but that doesn't mean no progress. Decided yesterday that a bit more needed chopping out: Cleaned it up with a wire wheel and etch primed it. Started making a chassis rail repair section. Utter PITA having to go under the car everytime and adjustment was made to make sure... Continue Reading →
With the 16v shell laid up, it's time to tackle the work on the 8v road car - so first job! Tackle those two chassis rail gussets that are goosed. Off side gets the treatment first. So here the progress so far. Car's now up on axle stands... Initial Inspection: Pick off the loose underseal:... Continue Reading →
Rallye Project 