On the last drive the back end was very noisy but it only became apparent what it was when I took the photos yesterday and had a look underneath. I had not secured the spare wheel properly. Fixed it now. https://youtu.be/l8NbQafIq-Y
With the Christmas festivities out of the way and with a few days before needing to be back to work, it has been an opportunity to press on with the project. Previously I had fitted a Citroen AX single wiper conversion to the car. The initial fitment had just made use of some of the... Continue Reading →
Well managed an hour tonight, looking forward to getting some quality time on this over the next few weeks. Seeing as I am going down the heated windscreen route and have stripped out the heater matrix and blower, there was another hole to fill in the bulkhead. Stitched the steering rack support whilst I was... Continue Reading →
Finally took some pictures of my modified top mounts to facilitate camber adjustment of the AST top mounts. Top mounts are in primer until I get around to repainting the whole engine bay. Non Power Steering Position. Power Steering Position.
Did some more tidying up of welds and then cracked on with something I've been meaning to do for a while, reinforce the wishbone mounting points. I had been lucky enough to be given a piece of 3mm angle iron which I've chopped and modified into reinforcement brackets. These took ages, but just need to... Continue Reading →
Finally made it out to the garage to do some proper work on the car for the first time in two weeks. It was baltic out there and too cold for painting, so it was time to get the weapons of mass destruction fired up. I've had these two sections marked out for the chop... Continue Reading →
Rallye Project 