After a lot of hours I have the majority of the engine bay in POR15 primer. I've left the lowest sections of the bay in a rough state because there still some work to do to bring the shell back to bare metal and treat it properly with POR15. The next job will be to... Continue Reading →
Photo of the finished box in the scuttle for the wiper motor. Spent a bit of time cleaning up some of the recent welds. Here is the blanking plate over where the heater motor air inlet was. Next job is to modify the steering column support so that I can get the welding in this... Continue Reading →
Bit more progress today... Fabricated up a box for the scuttle. Test fitted Welded up Tacked in place after this it was ground down to fit. I thought that I'd taken some pictures of it all welded up, but seems not. Also put the bonnet back on to show the clearance...
With the Christmas festivities out of the way and with a few days before needing to be back to work, it has been an opportunity to press on with the project. Previously I had fitted a Citroen AX single wiper conversion to the car. The initial fitment had just made use of some of the... Continue Reading →
Rallye Project 